How to Clean Your AirPods Case — A Step-by-Step Guide

04 Feb.,2024

 

Cleaning your AirPods case’s interior is more challenging. Since this is where the charging ports are located, it requires some delicacy. So let’s break it down:

Step One: Give It an Initial Wipe Down

In the same manner you cleaned the exterior, you want to clean the interior’s nooks and crannies of any initial dust and lint. Don’t forget the inside of the top of the case, too. Be sure to focus on the contact, too, ensuring that the case can charge quickly. This will also prevent the AirPods case from shorting out. 

Step Two: Do a Thorough Cleaning

At this step, you can use a very small amount of alcohol. Take caution not to soak the Q-tip. Use as little as possible and avoid drips that fall into the electronics. With the slightly damp cotton swab, gently work at any wax buildup. Still, avoid the grilles of the AirPods themselves and speaker elements.

Step Three: Pick Away Grime 

Use a toothpick and tacky tape to chip away and peel up any stubborn grime, particularly in areas like the cracks and fissures inside the case. This is really important in removing bacteria. If using a toothpick, just be extra gentle and patient around these areas and don’t apply too much pressure. With the tape, press it firmly into the grooves and peel it back up to remove caked in wax, et cetera. This works wonders for the tiny holes in the grilles! 

Step Four: Wipe Everything Down Again 

Take the microfiber cloth and wipe down everything once again, inside and out. Polish the AirPods case until it looks as good as new. Last, but not least, place your AirPods back inside their case and let them charge for their next use. 

With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of Custom Leather Airpods Case.