### How to use PET high temp protective films step-by-step.
#### 1. Preparing the surface.
Before applying the PET high temp protective film, make sure the surface is clean and free of dust, dirt, and moisture. Wipe the surface with a clean cloth and a mild detergent if necessary. .
#### 2. Cutting the film.
Using scissors or a cutting tool, cut the PET high temp protective film to the desired size and shape. It is important to make sure that the film covers the entire surface that needs protection.
#### 3. Peeling off the backing.
Carefully peel off the backing of the PET high temp protective film, exposing the adhesive side. Be gentle to avoid damaging the film.
#### 4. Applying the film.
Carefully position the film on the surface, starting from one end and smoothing it out as you go along. Use a squeegee or a similar tool to remove any air bubbles and ensure a smooth application.
#### 5. Trimming the edges.
Once the film is applied, use a sharp blade or cutting tool to trim any excess film around the edges. Make sure the edges are securely bonded to the surface.
#### 6. Applying heat.
To activate the high temp protection feature of the film, apply heat using a heat gun or a similar device. Evenly heat the entire surface of the film to ensure proper adhesion and maximum protection.
#### 7. Inspecting the film.
After applying heat, inspect the film for any remaining air bubbles or wrinkles. If necessary, use the squeegee to smooth out any imperfections.
#### 8. Testing the film.
Once the film is applied and heated, test its durability by subjecting it to high temperatures or other challenging conditions. This will ensure that the film provides the necessary protection for your surface.
By following these step-by-step instructions, you can effectively apply and use PET high temp protective films to protect your surfaces and keep them looking great for a long time.
For more information, please visit stretch wrap film suppliers, how to remove old plastic protective film, self adhesive carpet protection film.