If you are looking for more details, kindly visit .
Published April 2020
Updated January 2023
Did you know you could actually be doing more harm than good for your own health and the environment by purchasing plastic?
Consider the following reasons to switch from using plastic items in your everyday life, to using wood products.
#1: WOOD PRODUCTS ARE SUPER DURABLE
Contrary to popular belief, wood products are actually much more durable than plastic. Plastic can and does warp, break, melt, and chip over time, whereas wood products tend to hold their value, stay intact, and look classy forever.
While a plastic board can quickly end up scratched and damaged, a wooden board is more resilient as the knife slices between the fibers of the wood and doesn't leave marks. When marks or scratches do occur, these can be easily removed with a refinisher, leaving your board good as new.
Wood is a durable material for both homes and commercial buildings. When properly looked after it can last hundreds of years. Modern wood preservatives enhance natural durability.
#2: WOOD PRODUCTS ARE FAR MORE ECOLOGICAL THAN PLASTIC
It's pretty much common sense when you think about the fact that wood products are far more ecological than plastic and for good reason. Wood and the production of wood products leaves far less carbon imprint. Trees, when growing and alive, absorb carbon dioxide from the air, leaving behind clean filtered air, with more oxygen, for all of us to enjoy. On the other hand, plastic manufacturing puts carbon into the air, along with a myriad of other chemical compounds that are harmful to the ozone, human health, and wildlife.
Because plastics and their ingredients are pervading our oceans and waterways, invading the bodies of humans and wildlife, and filling landfills (with new and once recycled plastic) the Ecology Center recommends eliminating plastics from your life, as much as possible.
# 3: WOOD PRODUCTS DO NOT CONTAIN BPA
BPA, or Bisphenol A, is a synthetic compound which is used in the manufacturing of plastic products to bind the plastic together. BPA is present all around us in the environment and in manufactured products. Research has linked exposure to fertility problems, male impotence, heart disease and other conditions. Did you know that the majority of plastic products, unless specified on the product itself, contain BPA? What's worse is that this chemical has been found to be hazardous to human health - and most all plastic products contain BPA.
Imagine a product sitting across the room from you putting off harmful chemicals into the air. (Clocks, wall art, jewelry, kitchen accessories). Now, imagine yourself using a plastic phone case on your phone, in which you hold against your skin - and your head, no less - each and every single day. Wood phone cases don't do that.
#4: WOOD PRODUCTS ARE UNIQUE!
If you're like us, you love uniqueness. That's what you'll find with wood products. You see, no two pieces of wood are exactly the same, because no tree that they come from is the same - so each individual wood item is exactly that - individual and unique.
#5: YOUR WOOD PRODUCTS' BEAUTY WILL IMPROVE WITH TIME
Unlike plastic, which warps, chips, wears away, cracks, and even melts, wood products are incredible in the way that, as time wears on, your wood items gain character. Those little nicks, dents, and bangs against your products will only add character and life. As an added bonus, oils from your skin from touching your wood items will give way for the beauty of the wood to shine through, displaying the wood grain within.
Solid wood retains its appearance, achieving a lovely patina as it ages. Any damage that occurs can be easily repaired and the furniture restored to its original appearance. Environmentally over time, solid wood furniture is much more eco-friendly.
BONUS! #6: THE AESTHETIC IS UNMATCHABLE
If you were to place two products of a similar nature next to one another, one being plastic, and the other wood, which one would you believe to be more attractive? The wooden product, of course. There's just something incredibly classy about wood that plastic can't touch. That's yet another reason why wood products supersede the competition - because, truth be told, there really is no competition. Wood is unique, and wood products speak for themselves. Wood holds a timeless beauty that is unmatched by any other.
What is the favorite wood product in your home?
Please share with us below!
Get inspired and find new, high-quality products by visiting our website.
Our brand is a group of people who love life, outdoors, RV life, cabin living and endeavoring to make a difference simply one step at a time. We're every age and we often get excited viewing new products that come out during happy hour on Friday evenings!
We'd love to have you join us!
Sign up below and don't forget to follow us on your favorite social media channel.
click here to learn more about us today!
The ecological counterpart of daily used materials took the limelight after the threat of an intense rise in pollution. Now people across the globe are aware of pollution and its adverse effects on mankind and nature.
Around 3% of global plastic waste enters the ocean through rivers and other man-made outlets. The quantity of plastic in the surface water is estimated to be in the range of 10,000s to 100,000s tonnes.
So, the question here arises is which is more sustainable and ecological material to use. Most of us use plastic and wood the most in our day to day life.
However, people are still not aware of the pros and cons of wood or plastic. Here in this piece, you will find everything about plastic and wood.
Wood is a natural resource that is sourced from trees. It lies under renewable resources and is being used since the inception of mankind. Many trees are purposely grown to extract timber for production and development.
On the contrary, plastic is an artificial material made from fossil fuel feedstock. It comprises some harmful materials and releases hazardous gases while burning.
Wood might have an upper hand in various environmental parameters like carbon footprint and energy consumption. Wood is more energy-efficient than plastic and metal. The majority of the energy utilised in timber production comes from drying the lumber.
Metal, concrete, and plastic need a significant amount of energy from fossil fuels for production.
Wood comprises cellulose fibres that make it strong and heavier than plastic. The transportation of wood made material is expensive and requires a lot of energy and effort.
Whereas plastic is made up of polymers that make it feather weighted. The transportation of plastic made materials is simpler compared to metal and wood.
The ecological and economic impact of the U value of lumber and plastic is a subject of discussion. People across the globe produce 300 million tonnes of plastic each year, and 50% of the plastic consumption is for single-use.
25% of the global population relies on wood or forest for their livelihood and consumption.
Wood or timber is completely used by the timber mills. The outer covering or bark is utilised to make decorative pieces. First cuts are kept for use in engineered wood alternatives. The board ends are cut and they are traded as hobby woods. Sawdust is utilised for storing and animal bedding. Scrap wood is also used to keep the machines working in some mills.
Plastic can be recycled but only a few plastic alternatives can be reused. Only 9% of the world's plastic consumption gets recycled and the rest 91% stays on the planet.
The burning of wood emits a regulatory amount of CO2. Whereas burning of plastic emits furans, mercury, dioxins, and polychlorinated biphenyls that are dangerous for wildlife as well as humans.
Ocean pollution is also linked to plastic as 3% of the plastic production globally gets deposited in the ocean water. Such a high amount of plastic disposition poses life warning threats to marine life.
Plastic has more hazardous impacts on humans, wood is an organic source that is safe for kids as well as adults. Inhaling micro-plastics in our daily lives are closely related to plastic furniture and fabrics.
Wood emits CO2 during energy production and is easily consumed by the trees. This makes it safe for mankind.
100,000 marine mammals die every year due to plastic consumption. Species like whales, dolphins, seals, and porpoises are getting affected as they consume tonnes of plastic. Plastic has significant negative impacts on the environment than timber.
Wood is a biodegradable substance and gets decomposed in water. So, it poses less threat to marine life.
Also read: Plastic Bottle Manufacturers In India
Both wood and plastic are highly durable. As plastic is made up of polymers that are sourced from fossil fuels. Plastic is a non-biodegradable substance, it can break but cannot be recycled.
Whereas a hardwood can withstand a whole century and can be reused and recycled if broken.
Plastic and wood both are budget-friendly and inexpensive. However, in some byproducts, the price range varies. For example- plastic pallets are expensive than wooden pallets and plastic furniture is cheaper compared to wooden furniture.
Both these materials are economical depending on the usage. Most people go for plastic for its low costing.
According to a U.N agency, buying furniture made up of wood requires less energy and can help to cut carbon emissions. Wood is known to store carbon for a longer period and is more energy-efficient than metal and plastic. Here are some parameters to decide which one is more eco-friendly.
Carbon footprint is used to measure the impact of CO2 released during an activity. By knowing the carbon footprint of a material one can calculate the amount of carbon-di-oxide released in the atmosphere.
The carbon footprint of plastic or polythene is around 6kg CO2 per kg plastic. Recycling, composting, and dumping of plastic also release a high amount of carbon in the air.
However, wood comprises 50% of carbon and is widely used in building houses as it stores carbon and cuts a significant amount of carbon emission.
Materials that can be recycled without any chemical secretion are predicted as safe. Plastics emit many harmful gases while recycling whereas wood is safe to use and reuse. Hardwood, Solid softwood, untreated wooden planks, and packaged wood is good for recycling. These materials emit low CO2 and are safe for longer usage. Plastic furniture releases plastic microfibres in the air that lowers the air quality and is dangerous to inhale.
Convenient to use
Plastic is a convenient material to use, as it is light-weighted which makes it ideal for packaging and bringing products from the store.
Inexpensive
Plastics are inexpensive compared to other packaging materials, this is the reason organisations use synthetic fibres to pack products.
Durable
Plastics are durable and can withstand tough climatic factors. Plastics continue to resist rain, sun, and humidity to enter the product keeping it fresh and ready to use.
Leads to Pollution
The biggest disadvantage of plastic is that it contributes to water and air pollution. Most of the countries have a poor waste management system that makes it more dangerous for wildlife and humans. Terrestrial and aquatic creatures consume tonnes of plastic and peak premature death.
Carbon Positive
Wood is a greenhouse positive material with a lower environmental impact than plastic and metal. It helps in cutting down carbon emissions in the long run as wood is best for carbon-storing.
Requires low energy production
The method of timber generation requires less fossil fuel energy compared to plastic and material. Using one cubic meter of woodcuts 0.75 to one tonne of carbon emission.
Swelling and shrinking
Wood is a hygroscopic material and is made up of cellulose fibres that allow it to absorb condensable vapours and loses moisture to air after a certain period.
The plastic found in the surface area of the ocean is a lot less than the amount of input, this missing amount indicates plastic consumption by marine creatures. If this cycle continues most of the marine creatures will be on the verge of extinction.
Wood emits lower carbon levels than plastic and is safer to use. However, plastic is more convenient to use because it is light-weighted and keeps the product neat and ready to use.
1) Green Business Ideas for Startup Entrepreneurs
2) How to Make Online Business More Eco-Friendly?
3) How to design a business model for sustainable fashion?
4) Do You Consider Yourself to be Eco-Friendly? Let’s Check!
Stay updated with new business ideas & business tips with OkCredit blogs in English, Hindi, Malayalam, Marathi & more!
Download OkCredit now & get rid of your bookkeeping hassles.
OkCredit is 100% Made in India.
Contact us to discuss your requirements of wholesale wooden litter bins supplier. Our experienced sales team can help you identify the options that best suit your needs.